Frequently Asked Questions

Yes it most certainly does! Our secondary double glazing products have been manufactured since 1970 (for the over 50 years!) and it is estimated that between 4.5 to 5 million windows have had our secondary double glazing retrofitted to existing windows & doors in Britain and Europe. And, we have literally installed thousands of windows & doors in Australia. Please see the references from Australian customers on our homepage.

Basically, the answer is “No”, as we install a new window or door inside the existing window or door. This is why we are oftentimes the only option for double glazing in strata title properties & heritage listed properties where the exterior of the property cannot be modified.

The only exception is in the case where the door or window must be installed externally, which is very rare.

As we install a new window or door inside the existing window or door, we make no modifications to the exterior of the property. This is why we are oftentimes the only option for double glazing heritage listed properties where the exterior of the property cannot be modified.

No we don’t remove your existing windows. Our secondary glazing System is screwed to the inside of your existing windows.

If the secondary glazed window can fit inside the window frame (ie. the window handles don’t protrude too far) then measure inside the window frame.

If not, the window must be placed outside the window frame (called face fix). Then measure the window including the architrave at side, top & bottom.

No. In fact it is very slim. Our outer frame is only 36 mm from front to back. Often there is room to fit our window inside yours but if not we can fit it on the architrave.

We typically install our secondary glazing with screws no more that 400mm apart. And all our door & window frames are discretely siliconed in to close any gaps.

Yes we use 6.38 laminated glass this is made up of 3 mm glass, interlay and then 3 mm glass, all heat bonded together. All our glass is bought locally and we have deliveries to our factory approximately every 48 hours.

We will design our secondary glazed window so it can be opened to give you access to your openers where it is required.

Amazingly, it typically only takes approximately one hour to fit one of our secondary glazed window & then you can start obtaining the soundproofing & insulating benefits immediately. Additionally, there is little or no disruption as we do not have to remove & replace the existing window.

Condensation often occurs on single pane windows, normally in bedrooms &/ or bathrooms where you have a single pane of glass which is cold on the outside & warm inside. The condensation occurs on the inside.

If you install a retrofittted secondary glazed window in the bathroom or bedroom, the new internal window would be the same temperature as the room, therefore drastically reducing likelihood of any condensation forming.

So as to not effect acoustic or thermal performance, we recommend that if tinting is required, you tint your existing windows before installing our secondary glazed windows.

Magnetic secondary glazing involves installing a secondary window which is stuck to a frame around your existing window with magnets.

To open your window you have to physically remove the entire window. Just think about how would you go dealing with that … particularly for a large & thus heavy window … and what if you drop it!

We think in most cases that our solution is far better than magnetic secondary glazing. Contact us to find out why.

Our secondary double glazed windows are typically 30% or more less than traditional double glazed windows as we don’t completely replace the existing window but rather add a sealed unit inside your existing window.

We charge as little as $500 m² for double glazed windows manufacture, supply & installation (includes GST) in Sydney.

A double glazed window is simply a window with multiple panes of glass with an air gap in between the panes of glass to aid noise reduction or soundproofing & reduced thermal transfer (ie. Less heat out in winter & heat in in summer).

There are two approaches to double glazing windows. The more expensive option is to completely replace the existing window with a new window with two panes of glass. Then there’s our much cheaper & less disruptive approach, where we simply fit a new window on the inside of your existing window.

Double glazing is simply having two panes of glass in your door or window to reduce thermal transfer & noise.

You can either have traditional double glazing where your existing windows are completely replaced by dual pane windows or doors, or our much cheaper and better soundproofing option where we install a new door or window inside your existing windows.

The best and cheapest option for thermal & noise insulation for existing windows is with secondary double glazing.

We install a new window inside your existing windows. The large air gap provides excellent soundproofing & thermal transfer or insulation benefits and is typically 30% or more cheaper than replacing your windows entirely.

If you have traditional double glazing & have this problem, you can buy a kit online, which enables you to drill a small hole in the glass top & bottom, blow air into the holes to ventilate the moisture out & then reseal the holes.

This problem does not occur with our secondary double glazing. This is just another reason why retrofitting secondary double glazing to existing woindows is the best option for doule glazing existing windows & doors.

It certainly is possible, but most DIY or Do It Yourself Double glazing solutions don’t allow you access to your existing windows to open and close them. This can be a limitation to your lifestyle.

Absolutely. That is our speciality. Retrofitting secondary glazing to existing windows provides better soundproofing & thermal insulation & eliminates drafts. And, because you’re only fitting one new pane of glass, it is usually more than 30% cheaper than completely replacing windows as is the case with traditional double glazing.

Double glazing windows & doors is a great way to reduce noise and help soundproof a room.

For an existing property, our secondary glazing gives you better sound or noise reduction (Test results show a Sound Reduction Index of 45 decibels) due to a larger air gap and is typically 30% or more less cost than for traditional double glazing where the existing window is replaced in its entirety.

Double glazed doors provide great soundproofing for doors.

Our secondary glazing solution, where we fit a new door inside your existing door, is the cheapest method to provide double glazing for existing doors (ie. Patio doors, French doors and the like).

Double glazing is the best & most effective way to soundproof windows.

But for an existing property, our secondary double glazed windows, where we fit a new window to the inside of your existing window is by far the cheapest method of soundproofing windows & in fact gives better soundproofing due to a larger air gap between the panes of glass.

Secondary double glazing of existing doors & windows in an apartment will have a significant soundproofing impact.

Tests show our double glazed windows have a Sound Reduction Index (SRI) of 45 dB (decibels). And as we don’t completely replace your doors & windows our solution is typically 30% or more cheaper.

Secondary double glazing of existing doors & windows in a bedroom will have a significant soundproofing impact.

Tests show our double glazed windows have a Sound Reduction Index (SRI) of 45 dB (decibels). And as we don’t completely replace your doors & windows our solution is typically 30% or more cheaper.

Using double glazing for sound proofing windows works because there is a sound insulating layer of air sandwiched between two panes of glass which disrupts sound wave vibrations.

Our secondary double glazing works better than traditional double glazing as the air gap is larger. Tests show we have a Sound Reduction Index of 45 dB (decibels).

In a word, no. But, we have installed our secondary glazed windows with great results in Sound Studios & Music Studios.

So, if your son or daughter plays the drums & the neighbours complain, we can certainly help.

With secondary double glazing where we install a new sealed window on the inside of the existing window.

This approach offers better soundproofing & insulation & elimination of drafts for typically 30% or more less than if you completely replace the existing windows with traditional double glazing.

Double glazed windows can provide significant reductions in traffic noise.

With secondary double glazing we install a new, completely sealed window on the inside of an existing window.

This approach offers better soundproofing & insulation & elimination of drafts for typically 30% or more less than if you completely replace the existing windows with traditional double glazing.

So, if you want to reduce traffic noise, we can help. And don’t forget to check out the videos to hear for yourself just how much more effective this approach is for sound proofing.

Manufacture is approximately 3 to 4 weeks. And remember, it only typically takes us one hour per window to install them.

Yes we require approximately 25% deposit before we will commence manufacture.

We carry a mobile EFTPOS machine so we can take MasterCard, American Express, And Visa Cards. You can also do a online transfer directly into our bank and We also accept cash and cheque.